T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V

T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V
T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V

T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V

T-8280 Infrared Préchauffage Station Infrarouge Soudure 1600W 280x270mm. Selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely. It can achieve to heat PCB board and component which contains lead or not.

Especially for the BGA and SMD parts. This item has 1600W heating system, widely to 280x270mm.

It is easy to operate, you can operate it through easy training. O see how to use this. Inspect the machine and then open it. Check the connection of the power line. Turn on the power switch. Allow the T-8280 Power-On-Self-Test (POST) to complete. After this, Temperature set-points will display last value used.

The black switch on the front panel are used to control the infrared preheating plate; press the blue button (up). The red button(down), can adjust the infrared preheating plate temperature between 0 and 450. The infrared preheating plate starts to work, press"OFF". Operation of preheating PCB board.

The placement and adjustment of the PCB board. According to the size of the PCB board, adjust the PCB board holder, then put the PCB board and fix the adjust knob. According to the size of PCB board and welding technological requirement, press the blue button (up)and the red button (down), regulate the output temperature of preheating plate between 0 and 450. Press the "ON" button, open the preheating plate about 3-5 minutes, make the temperature be the setting value then carry on the next step. Finishing, press "OFF", the preheating plate stops working. Attention: Don't close the power switch until the machine full cooling.

The preheating temperature set: If the PCB board contains lead, adjust the infrared preheating plate temperature to 100-120; if not, adjust to 120-140. You can also set the preheating temperature according to the user's experience and technology. The preheating plate heating type includes: the total pressure flow-through heating way and the PID percentage adjustment way. You can adjust it according to the preheating allowance.

Generally speaking, if the preheating temperature is lower than 250 , selects the PID percentage adjustment method; and if the preheating temperature is higher than 250, use the total pressure flow-through heating way. Press choose 0 or 1, every press the status change one time. C=0 is PID percentage adjustment, C=1 is switching control.

After finishing, don't turn off the power imme. Diately; make sure the inf. Rared preheating plate complete cooling.

Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly! The high temperature operation, pay attention, avoid scalding.

If you don't use the machine for a long time, you'd better pull off the power source pl. This machine selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely.

T-8280 can achieve to heat PCB board and component which contains lead or not, especially for the BGA and SMD parts. Use infrared heat, easy to cut through, heat proportion, don't have sirocco flow. Don't shift the small components on the PCB board, ensure the welding quality. This machine has 600W heating system, widely to 280x270mm. Can use together with the handhold infrared welder T-835.

Easily operate, you can operate it through easy training. Work Bench Size: 410×316mm(16.14"×12.44"). Rated Voltage and Frequency: AC 220v-230v/50Hz. Preheating Plate Size: 280×270mm(11"×10.63").

Preheating Plate Temperature Adjustable: 0450. 1 x Preheating plate main body.

1 x PCB board holder. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. You want to cancel an order. If you need further assembly instructions for a product.

Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from. A: Please log on your account.

Q: How do I return an item? Please contact our customer service before you return an item.

L'item "T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V" est en vente depuis le vendredi 8 février 2019. Il est dans la catégorie "Équipements professionnels\Bâtiment, construction\Plomberie\Soudure". Le vendeur est "bestdiscountvipstore" et est localisé à/en Jenec. Cet article peut être expédié au pays suivant: Europe.


T-8280 Infrared BGA SMD IC Heater Station Soldering Area 280 x 270mm 1600W 230V


Page d'accueil  Carte du site  Contact  Déclaration de confidentialité  Termes d'utilisation